| Model |
MB4023x5 |
| Working piece width(mm) |
25-230 |
| Working piece thickness (mm) |
8-120 |
| Tool Diameter≤φ160mm |
| Feed speed(stepless speed changing)(m/min) |
6-24 |
| Feed plate length (mm) |
1767 |
| The first lower horizontal planer too spindle |
| Speed (rpm) |
6000 |
| Tool shaft diameter(mm) |
φ40 |
| Turning diameter of tool shaft(mm) |
φ108-145 |
| Max. length of installing blade(mm) |
240 |
| Axial adjusting range of tool shaft(mm) |
20 |
| Motor power (kw) |
5.5 |
| Right-and-left vertical milling tool spindle |
| Speed (rpm) |
6000(7500) |
| Diameter of tool shaft (mm) |
φ40 |
| Max. turning diameter of tool (mm) |
φ125-180 |
| Max. length of installing blade(mm) |
130 |
| Axial adjusting range of tool shaft(mm) |
30 |
| Motor power (kw) |
7.5 |
| Upper and lower horizontal tool axle |
| Speed (rpm) |
6000 |
| Diameter of tool shaft (mm) |
φ40 |
| Turning diameter of tool for arcuation pieces (mm) |
φ108-145 |
| Turning diameter of tool for plane pieces (mm) |
φ108-160 |
| Turning diameter of the second lower horizontal tool axle (mm) |
φ108-180 |
| Max. length of installing blade(mm) |
240 |
| Axle adjusting range (mm) |
30 |
| Motor power of upper tool axle (kw) |
7.5 |
| Motor power of lower tool axle (kw) |
5.5 |
| Feeding pinch wheel(mm) |
φ140 |
| Feed motor power (kw) |
3 |
| Feeding girder lift motor power(kw) |
0.55 |
| Outer diameter of chip discharge pipe(mm) |
φ150 |
| Total capacity of installed motor(kw) |
29.55 |
| Air pressure (Mpa) |
0.3-0.6 |
| Overall dimensions(mm) |
3545x1700x1600 |
| Weight(kg) |
2800 |
