 |
| MB524 Surface Planer |
Surface planer was used to shave wood board thin, even strips the material until the piece was the right thickness. There is one rollers in the planer, and two or three knives around the roller. which remove a very thin layer of material from the board.
It has a small infeed and outfeed table that helps guide the stock through the planer, also has a hand-crank that adjusts the cutting depth. |
|
 |
|
 |
| MB505 Surface Planer |
| Surface planer was used to shave wood board thin, even strips the material until the piece was the right thickness. There is one rollers in the planer, and two or three knives around the roller.This model surface planer uses the morden European technology. |
|
|
|
 |
| MB105E Press Planer |
| A thickness planer consists of three elements: a cutter head which contains the cutting knives; a set of in feed and out feed rollers which draw the board through the machine; and a table which is adjustable relative to the cutter head to control the resultant thickness of the board. In this model there are two screws which are used to adjust the gap from the worktable to cutter. |
|
|
|
 |
| DL4006 High-speed Six-spindle Four-side Moulder |
| This model four-side moulder is designed according to European Technology. All the main parts are coated by harden and flashed chrome, such as worktable, feeding rolls etc. The main structure is made from cast iron, it has nice spraying and appearance. |
|
|
|
 |
| MB4023 x5 Five-spindle Four-side Moulder |
| This 4 side moulder is design by BSY Group, The infeed table is coated by harden chrome, the main structure is made from cast iron, so the frame is rigid. The infeed rolls is coated by harden chrome, the outlet roller is coated by polyurethane. It lets you handle moulding job with greater efficiency and safety. |
|
|
|
