| Model |
MB402C |
| Working piece width(mm) |
20-200 |
| Working piece thickness (mm) |
10-80 |
| Tool Diameter≤φ128mm |
| Feed speed(stepless speed changing)(m/min) |
6.3;8.3;12.5;16.3;21.5;32.7 |
| The first lower horizontal planer too spindle |
| Speed (rpm) |
5000 |
| Tool shaft diameter(mm) |
φ128 |
| Turning diameter of tool shaft(mm) |
|
| Max. length of installing blade(mm) |
|
| Motor power (kw) |
3 |
| Right-and-left vertical milling tool spindle |
| Speed (rpm) |
5000 |
| Diameter of tool shaft (mm) |
φ40 |
| Max. turning diameter of tool (mm) |
φ150-175 |
| Max. length of installing blade(mm) |
|
| Motor power (kw) |
3 |
| Upper and lower horizontal tool axle |
| Speed (rpm) |
5000 |
| Diameter of tool shaft (mm) |
φ40 |
| Turning diameter of the second lower horizontal tool axle (mm) |
φ110-160 |
| Max. length of installing blade(mm) |
|
| Motor power of upper tool axle (kw) |
5.5 |
| Motor power of lower tool axle (kw) |
3 |
| Feeding pinch wheel(mm) |
|
| Feed motor power (kw) |
1.8;2.6;3 |
| Feeding girder lift motor power(kw) |
|
| Outer diameter of chip discharge pipe(mm) |
|
| Total capacity of installed motor(kw) |
20.5 |
| Air pressure (Mpa) |
0.4-0.6 |
| Overall dimensions(mm) |
2885x1370x1403 |
| Weight(kg) |
2300 |
