A rip saw is a saw that is specially designed for making rip cuts. The cutting edge of each tooth has a flat front edge and it is not angled forward or backward. This design allows each tooth to act like a chisel (as opposed to a knife as with the crosscut saw), which prevents the saw from following grain lines. By acting like a chisel, the saw can more easily cut across grain lines, which is necessary if a straight cut is to be achieved.
For this model, there is a single saw blade mounted on main shaft. The feeding device is special track.
The main specification:
| Model |
MJ153E |
| Max. sawing thickness (mm) |
85 |
| Max. sawing width(mm) |
365 |
| Min. sawing length (mm) |
330 |
| Feed speed (m/min) |
13.3-23.3 |
| Diameter of saw blade （mm) |
φ250-305 |
| Feed motor (kw) |
0.75 |
| Total motor power (kw) |
7.5 |
| Overall dimensions (mm) |
1700x980x1390 |
| Weight (kg) |
980 | |
